Injection Molding Machine for the Thin Wall Products
The TOPUNITE High-speed injection machines possess precision oil pressure and flow control. It’s easy to achieve the requirement of the thin-wall product, for example, the size, tolerance, and quality.
Our High-speed injection machines could inject the same plastic volume in every single cycle based on your setting, even in the high injection-speed. In the quick mass production, preventing the short shot or causing the flashes problems effectively reducing the thin-wall product production costs.
The thin-wall injection molding is wildly using in precision instrument parts, electronics, medical equipment, communications, or food packaging containers. Due to the thin product thickness, the resistance of the mold gate is higher, it requires a high-speed, stable injection performance, and sturdy clamping structure to achieve the high-efficiency output within the shortest cycle time.
THE BENEFITS OF INJECTION MACHINE TO APPLY IN THE THIN-WALLED PRODUCTION INDUSTRY
The TOPUNITE High-speed Injection molding machines have an excellent injection performance. It is suitable for the production of thin-walled plastic products, such as precision instruments, medical equipment, communication equipment, and food container.
The high-speed injection machine controls injection pressure, holding pressure, and back pressure by a servo solenoid valve. The signal response time of the valve from 0% to 100% only 26ms, it means the machine could accurately switchover the injection into the holding-pressure setpoint. By a multi-stage of P.I.D Digital control card, it provides different parameters in the injection, plasticizing, and holding-pressure phases. With the control of the servo valve and control card that makes sure each phase of the injection has the same oil pressure and flow come out. With the assistance of the accumulator, the top speed of injection reaches 360mm/s. The excellent injection performance of the TOPUNITE injection machine helps you achieve maximum productivity with the shortest production cycle while ensuring the quality of thin-walled products and reducing your time cost.
Due to its precise control and fast response speed, TOPUNITE high-speed injection machine could also ensure the same plastic volume output in each cycle at a very high speed of injection. It is applied to the thin-wall products and helping you achieve the highest productivity in the shortest cycle while ensuring the quality of thin-walled products, reducing production costs.
Thin wall products made by TUM Injection molding machine.
Thin wall products made by High Speed Injection molding machine.
Thin wall products made by High Speed Hybrid Injection machine.
- Related Products
EHIII Series (50~750 TON)
The High-Speed Injection Molding Machine reaches the 360mm/sec injection speed rate by the assist of the accumulator. To control the flow from the accumulator, we use a servo valve to inject, charge and switch the holding pressure point, which makes sure every single injection could inject the same volume of plastic to prevent the flashing or short shot of the products.
EHIII-DS Series (50~750 TON)
The High-Speed Injection Machine with the Bosch Rexroth servo-valve and the Rexroth Injection Molding Process Controller. The controller has rapid response and feedback, and multi-stage of PID control features that enable to control of injection pressure, hold pressure, and backpressure precise.