Plastic injection molding machine to apply in IML industry
Top Unite plastic injection molding machine has been applied in the In-Mold Labeling industry for many years. We are the first plastic injection molding machinery company in Taiwan that launched the injection molding machine go with the IML machine in the early 1990s. As time goes on and experiences accumulate, we are now launching a whole new generation of IML special injection molding machines. Based on the clients, we customized the machines to meet every client, and build up a perfect and profitable IML injection molding production line.
The benefits of plastic injection machine to apply in the IML production industry.
Top Unite make some changes and optimization to this new generation of IML injection molding machine, roughly we could separate in three parts:
1.Clamping and Injection units synchronized
We adopt two power resources to control injection unit and clamping unit and make both units movements synchronized. That change could add 20% of production at least.
2.Clamping unit optimization
The optimization of the clamping oil manifold which speeding up the mold clamping and increases stability during the robot to catch products to ensure the operation working smoothly.
3.Multiple PID signal output
Multiple pressure and flow P.I.D parameters control the clamping and injection units independently to make sure the setup requirements more closely to the actual situation.
Top Unite provides the IML injection molding Turn-key solution to clients by our abundant experience. We help to integrate the mold, IML machine into our injection molding machine. Adjust by your request and trial-run the production line into a peak condition before the delivery.
In-mold labeling plastic injection molding machine.
- Related Products
EHIII SERIES (50~140 Ton)
The small high-speed plastic injection molding machine is from 50 tons to 140 tons. It comes standard with a high-response servo valve and accumulator. During the assistance with the accumulator, the injection rate can reach 360mm/sec. The high-response servo valve detects the actual pressure and position of the injection by the transducer and then catches the feedback signal to adjust the output to reach a perfect closed-loop control. By the precision control of the injection, plasticizing, and holding switch-over to prevent causing flash or short-shot. If you need more detail of product catalog, please reach out to us.
EHIII-DS Series (50~140 TON)
The 50 ton to 140 ton High-Speed Hybrid Plastic Injection Machine with the Bosch Rexroth servo-valve and the Rexroth Injection Molding Process Controller. The controller has rapid response and feedback, and multi-stage of PID control features that enable to control of injection pressure, hold pressure, and backpressure precise. If you need more detail of product catalog, please reach out to us.
EHIII SERIES (180~750 Ton)
The High-speed plastic injection molding machine features 180 ton to 750 ton medium and large size and reaches the 360mm/sec injection speed rate by the assist of the accumulator. To control the flow from the accumulator, we use a servo valve to inject, charge and switch the holding pressure point, which makes sure every single injection could inject the same volume of plastic to prevent the flashing or short shot of the products. If you need more detail of product information or buying consultation, please contact us.
EHIII-DS Series (180~750 TON)
The High-Speed Hybrid Plastic Injection Machine is designed with the Bosch Rexroth servo-valve and the Rexroth Injection Molding Process Controller. The controller has rapid response and feedback, and multi-stage of PID control features that enable to control of injection pressure, hold pressure, and backpressure precise. If you need more detail of product catalog, please reach out to us.