Menu

Successful Project

Plastic Injection Molding Machine Project

Plastic Injection Molding Machine Project

Using Plastic Injection Molding Machine to improve quality

More
Hybrid plastic injection molding machine

Hybrid plastic injection molding machine

Provide The Hybrid Plastic Injection Molding Machine to The Famous Factory.

More

The Thin Wall Plastic Injection Molding Machine Create Benefit for South African Customers

Top Unite machinery’s professional and all-round technical support has won the trust of customers

The Thin Wall Plastic Injection Molding Machine Exports to South Africa.
The Thin Wall Plastic Injection Molding Machine Exports to South Africa.

Top Unite provides a 320tons hybrid plastic injection molding machine for a food container manufacturer. This injection molding machine is build up to produce 1gal thin-wall(0.7mm) peanut butter containers and successfully achieved the single cycle within 10sec that was set up by the client. Since the high-rate and high-stability of the production, the client gave us a high-praise for this cooperation and promises Top Unite is the first choice for purchasing injection molding machines in the future.

Customer background and case description

This client is from the South-Africa and wants to make a thin-wall food container. This kind of container needs high injection pressure and speed to shot the plastic into the mold in an extremely short time. However, due to the unstable power supply system, their existing injection machine lowers down the max pressure and speed setting of machines. The injection is limited after adjusting, that causes the thin-wall products are facing a producing dilemma. Via the introduction by the mold maker, the client found Top Unite and told us the difficulty in the production they’re facing.

The product info is as below.
1. Gate: 2mm
2. Weight
3. Lip diameter: 176.4mm
4. Bottom diameter: 160mm
5. Height: 143mm
6. Thick of the wall: 0.7mm

THE CONSULTING SERVICE, PLANS FOR THE INJECTION MOLDING SOLUTION

Top Unite after confirmed the feature, specification, expected production, and cycle time of the container, suggests the 320tons hybrid injection mold machine to the client.

To reach the best production condition, Top Unite upgrades the servo motor the output power from 33kw to 37kw, the max hydraulic oil flow add 50L/min, from 250L/min to 300L/min. This machine with Ø65 barrel, the injection speed is reaching 172mm/sec.

In the mold trial, we arrange for our technician to adjust the machine based on the requirements of the client to make the injection machine goes perfectly. Besides, ensure the IML machine working smoothly in our injection machine and integrate the entire auxiliary equipment to deliver the machine in the shortest time to ensure the benefit of the client. For now, the production per cycle time is 9sec, coupled with IML the whole cycle time is about 12sec. We successfully met the client's requirements.

Related Products
  • Small Size High Speed Plastic Injection Molding Machine - The small size high-speed injection machine can reach an injection speed of 360mm/sec.
    Small Size High Speed Plastic Injection Molding Machine
    EHIII SERIES (50~140 Ton)

    The small high-speed plastic injection molding machine is from 50 tons to 140 tons. It comes standard with a high-response servo valve and accumulator. During the assistance with the accumulator, the injection rate can reach 360mm/sec. The high-response servo valve detects the actual pressure and position of the injection by the transducer and then catches the feedback signal to adjust the output to reach a perfect closed-loop control. By the precision control of the injection, plasticizing, and holding switch-over to prevent causing flash or short-shot. If you need more detail of product catalog, please reach out to us.


  • Small Size High Speed Hybrid Plastic Injection Molding Machine - The small size high-speed energy saving injection molding machine.
    Small Size High Speed Hybrid Plastic Injection Molding Machine
    EHIII-DS Series (50~140 TON)

    The 50 ton to 140 ton High-Speed Hybrid Plastic Injection Machine with the Bosch Rexroth servo-valve and the Rexroth Injection Molding Process Controller. The controller has rapid response and feedback, and multi-stage of PID control features that enable to control of injection pressure, hold pressure, and backpressure precise. If you need more detail of product catalog, please reach out to us.


  • Medium and Large Size High Speed Plastic Injection Molding Machine - High Performance High Speed Plastic Injection Molding Machine.
    Medium and Large Size High Speed Plastic Injection Molding Machine
    EHIII SERIES (180~750 Ton)

    The High-speed plastic injection molding machine features 180 ton to 750 ton medium and large size and reaches the 360mm/sec injection speed rate by the assist of the accumulator. To control the flow from the accumulator, we use a servo valve to inject, charge and switch the holding pressure point, which makes sure every single injection could inject the same volume of plastic to prevent the flashing or short shot of the products. If you need more detail of product information or buying consultation, please contact us.


  • Medium and Large Size High Speed Hybrid Plastic Injection Molding Machine - High Performance High Speed Hybrid Plastic Injection Molding Machine.
    Medium and Large Size High Speed Hybrid Plastic Injection Molding Machine
    EHIII-DS Series (180~750 TON)

    The High-Speed Hybrid Plastic Injection Machine is designed with the Bosch Rexroth servo-valve and the Rexroth Injection Molding Process Controller. The controller has rapid response and feedback, and multi-stage of PID control features that enable to control of injection pressure, hold pressure, and backpressure precise. If you need more detail of product catalog, please reach out to us.