Menu

Successful Project

Plastic Injection Molding Machine Project

Plastic Injection Molding Machine Project

Using Plastic Injection Molding Machine to improve quality

More
Hybrid plastic injection molding machine

Hybrid plastic injection molding machine

Provide The Hybrid Plastic Injection Molding Machine to The Famous Factory.

More

Medium and Large Size High Speed Plastic Injection Molding Machine

EHIII SERIES (180~750 Ton)

The High-speed plastic injection molding machine features 180 ton to 750 ton medium and large size and reaches the 360mm/sec injection speed rate by the assist of the accumulator. To control the flow from the accumulator, we use a servo valve to inject, charge and switch the holding pressure point, which makes sure every single injection could inject the same volume of plastic to prevent the flashing or short shot of the products. If you need more detail of product information or buying consultation, please contact us.

Plastic Injection Molding Machine with the servo valve and assisted by the accumulator, Horizontal Injection Molding Machine

Plastic Injection Molding Machine Core Features

  • Clamping force from 180ton - 750ton.
  • Injection with dual hydraulic cylinders.
  • Response time of servo valve signal from 0% to 100% only needs 26ms.
  • Maximum injection speed rate is up to 360mm/sec.
  • High speed and precision.
  • OLAER pressure accumulator.

Your Benefits of purchaseing Plastic Injection Molding Machine

  • High-speed injection, maximum capacity.
  • The best choice for thin wall and multi-cavity products.

Our Advantage

  • The High-Speed Plastic Injection Molding Machine equips the accumulator to boost the injection speed. And built a close-loop in the injection oil circuit system which is controlled by a rapid response servo valve, which makes the injection molding machine is not only high speed but also precise.
  • Each pressure accumulator has CE certification with high safety and stable pressure releasing performance.
  • The s-60c high carbon steel slide matched the roller bearing reduces the friction and brings smooth during mold opening and clamping.
  • Mold open/clamping switch is controlled by a proportional solenoid valve increase the stability of the platen location point.
  • The platen uses the FCD-600 spheroidal graphite cast iron could achieve 600 ~ 750 N/mm² tensile strength not easy to bend or deform.
  • The toggle automatic centralized lubrication system, always keeps the toggle and copper bushing parts lubricated to increase the life-time.
  • The Mold Adjustment Mechanism with sturdy gear and high torque hydraulic motor has high strength and low clearance, which reduces adjusting time and increases accuracy.
  • Mold Adjustment Motor with Brake Unit always keeps the platen in the same position prevents to cause the flash of the products.

Medium and Large Size High Speed Plastic Injection Molding Machine Gallerys

Related Application

Plastic Injection Molding Machine is suitable for thin-walled or frame products such as food containers and panel frames, which are large injection area but with a small injection amount.

Specification Table
Related Products
  • Medium and Large Size High Speed Hybrid Plastic Injection Molding Machine - High Performance High Speed Hybrid Plastic Injection Molding Machine.
    Medium and Large Size High Speed Hybrid Plastic Injection Molding Machine
    EHIII-DS Series (180~750 TON)

    The High-Speed Hybrid Plastic Injection Machine is designed with the Bosch Rexroth servo-valve and the Rexroth Injection Molding Process Controller. The controller has rapid response and feedback, and multi-stage of PID control features that enable to control of injection pressure, hold pressure, and backpressure precise. If you need more detail of product catalog, please reach out to us.



Files Download
  • EHIII-DS EHIII OS-50-110 Specification Table
    EHIII-DS EHIII OS-50-110 Specification Table

    50ton to 550ton plastic injection molding machine, according to the size, thickness and injection weight of the mold, you can select the type of the injection machine that best meets your needs. If you still have questions after consulting the information, please do not hesitate to ask us, we will be happy to help you.


  • EHIII-DS EHIII OS140-250 Specification Table
    EHIII-DS EHIII OS140-250 Specification Table

    50ton to 550ton plastic injection molding machine, according to the size, thickness and injection weight of the mold, you can select the type of the injection machine that best meets your needs. If you still have questions after consulting the information, please do not hesitate to ask us, we will be happy to help you.


  • EHIII-DS EHIII OS320-550 Specification Table
    EHIII-DS EHIII OS320-550 Specification Table

    50ton to 550ton plastic injection molding machine, according to the size, thickness and injection weight of the mold, you can select the type of the injection machine that best meets your needs. If you still have questions after consulting the information, please do not hesitate to ask us, we will be happy to help you.