Injection Molding Machine for Automotive Industry
TOPUNITE MACHINERY provides precision plastic injection molding machines with high-response and stability control. The machine could show its high-repeatability even if under an extreme injection situation. Therefore the TUM injection machine has a stellar performing in the auto industry to produce complicated plastic parts and upholstery.
In the automobile industry, the light-weight component is a trend to save the consumption of fuel nowadays. Manufacturers use engineering plastic parts contains glass fiber to replace the conventional metal parts. The auto-parts required a precision size of its structure; some of these parts related to the safety issue, therefore the CAPA makes a strict standard to stipulate to auto-parts. Besides the standard set by the CAPA, there are more details requested such as the outward appearance cannot have burrs, sink, and so on.
THE BENEFITS OF INJECTION MACHINE TO APPLY IN THE AUTO-PARTS PRODUCTION INDUSTRY
To deal with this high-standard checking point, the TOPUNITE provides the solutions by high-quality injection machines. The TUM injection machine has precision control at the injection and dosing, high-response time for the injection and dosing valve opening time from 25 to 45ms, and 10 to 25ms to close. These advantages help to maintain every single shot volume's stability that makes the final product could always keep the size in the tolerance. Consequently, it's easy to achieve the injection parameters set up by the user.
The engineering plastic belongs to hard material, in the injection setting, needs high-pressure to inject the material into the mold. If the platen cannot resist the high pressure from the injection, the platen will come to bending or deforming that causes the burrs of the products. The TOPUNITE injection machines by using FCD-600 nodular cast iron platen could resist high injection pressure and speed to prevent causing the burrs that help you to raise your yield.
TOPUNITE MACHINERY provides precision plastic injection molding machines.
- Automotive parts produced by customers of TOPUNITE MACHINERY.
- TOPUNITE MACHINERY provides precision plastic injection molding machines.
- TOPUNITE provides the solutions by high-quality injection machines.
- TOPUNITE provides solutions to manufacturers of plastic auto parts.
- Related Products
EH Series (180~750 TON)
TUM launches medium and large-size Hydraulic Injection Molding Machines ranging from 180ton to 750ton. It comes with a high-performance electro-hydraulic control system, by the German Bosh Rexroth solenoid, and a proportional pressure relief valve (both with Lvdt). We use a double fixed displacement vane pump to provide hydraulic pressure and flow source make these two pumps confluent, which gives an advantage to boots up the speed of the machine to raise the production output.
EH-DS Series (180~750 TON)
The 180ton to 750ton medium and large size Hybrid Injection machine equips a high-performance servo motor, which also achieves an outstanding energy-saving effect. With a rapid response and pressure output linear feature, easy to reach every requirement given by the user. It reduces the motor r.p.m when during the low flow is required and the product cooling to save the energy consumption. Comparing with the conventional hydraulic injection machine, it saves 60% energy at least.